TenTec
[Top] [All Lists]

[TenTec] On Contact Cleaning

To: <tentec@contesting.com>
Subject: [TenTec] On Contact Cleaning
From: walt@jove.acs.unt.edu (Walter S Delesandri)
Date: Sat, 27 Feb 1999 06:29:35 -0600 (CST)
I learned from a musical instrument repairman years ago to 
use either carburetor cleaner or "gun"cleaner spray (chlorinated 
solvent) to clean the pots and switches, followed by WD-40, followed 
by compressed air (to dry out most of the WD-40)....the old 
camera repairman I worked with 20 years ago used the SAME 
process (BTW< fewer plastics in those days to damage!!)

I used this process on BAs for YEARS, with excellent results...
the solvent cleaned out years of gunk, and the WD-40 left enough 
lubricant to preven "seizing" and to make the pots/switches 
smooth (again NO plastic pots/switches)....

When I got into Collins, I was nervous because the WD-40 
"darkened" the switch wafers and it bothered me....bear in 
mind, for YEARS I never had anything but success but I began 
to worry about the switch wafers....no problems, just worry!!

So I changed to "de-oxit"....I still use the "gun"cleaner spray, 
if they're really dirty, followed by De-oxit spray once they're 
clean....I still use a little WD-40 on a screwdriver tip to 
"lubricate" the shafts, and a bit of "red grease" on the 
detent balls on rotary switches....all of this is "Collins" 
paranoia, as I never had trouble in the past, just got 
nervous working on Art's "finest".....damn, so many worries, 
and I don't know which ones to obsess on.......

73, Walt

On
Fri,
26 Feb
1999, Steve Ellington wrote:

> 
> 
> On Fri, 26 Feb 1999, Dr. Gerald N. Johnson, P.E. wrote:
> 
> > WD-40 leaves a mighty thin and mighty little oil behind. I've come to
> > prefer straight kerosene for loosening stiff farm machinery.
> 
> 
> And this is exactly what we need on switches.
> For farm machinery kerosene would be a lot cheaper.
> 
> 
> > 
> > Caig Deoxit, Cramolin R-5 is VERY effective on noisy contacts and pots.
> > Others are not as good. A tiny drop goes a long way.
> > 
> 
> And so is WD-40 plus it cheaper, smells good and you can also use to clean
> bugs off your windshield. It is as good. How do I know? Because it works
> 100%. 
> 
> > The screaming Norelco probably needs to be used before the shower and
> > the face would leave more lubricant that WD-40.
> 
> Shaving after a shower would be a dumb idea anyway. An no, my face isn't
> that oily.
> 
>  
> 
> 
> Steve Ellington N4LQ
> N4LQ@IGLOU.COM
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 
> 


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>