TenTec
[Top] [All Lists]

[TenTec] Omni V Mic Drive

To: <tentec@contesting.com>
Subject: [TenTec] Omni V Mic Drive
From: ve7asr@islandnet.com (Rick Williams)
Date: Sat, 6 Mar 1999 11:14:09 -0800
I was working the ARRL contest today and noticed something odd!  When
I went to 10 metres and operated barefoot the mic drive required was
almost full clockwise (approx. 5 o'clock)!  (I usually operate with
the drive at about 9 o'clock position).  This was the only place I
could get significant ALC indication and significant SSB output (80 to
90 watts).

When I turned on the Hercules II and transmitted I needed to back the
drive WAY back to about 10 o'clock.

I tried the same operation on 12 metres and it behaved in the same
manner. Fifteen meters and lower frequencies are normal??

What's happening??

Rick Williams
VE7ASR

email:  ve7asr@islandnet.com
Packet:  VE7ASR@VE7DIE.#SVI.BC.CAN.NOAM


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>