TenTec
[Top] [All Lists]

[TenTec] 301 and Omni VI+

To: <tentec@contesting.com>
Subject: [TenTec] 301 and Omni VI+
From: kg5u@hal-pc.org (Dale L. Martin)
Date: Wed, 3 Nov 1999 05:50:32 -0600
Tell me what your wiring scheme is, Robert.

It should work when you plug it in.  There are no radio commands to
turn it on/off.

Suspect that there is a wiring error somewhere.  Do you have 5 volts
where you are supposed to have 5 volts?  Do you have ground where you
are supposed to have ground?  Have you monitored the phase 0 and phase
1 voltage outputs as you rotate the encoder while it is connected to
the radio?

Have you verified the connections in the DB-25 connector?  Check out
my webpage on the 301 and verify your wiring.

http://www.hal-pc.org/~kg5u/301.html

73,
Dale Martin, KG5U
kg5u@hal-pc.org
http://www.hal-pc.org/~kg5u

-----Original Message-----
From: Robert <bigmack@nortexinfo.net>
To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Tuesday, November 02, 1999 22:16 PM
Subject: [TenTec] 301 and Omni VI+


>
>Anybody got one of these working? The kit is so easy my cat could put
it
>together, but the instructions simply give me pin outs.. Is there
anything
>I should be doing to the radio itself to make the external knob work?
Some
>menu setting perhaps? I have it all wired up and plugged in
correctly, but
>it does nothing... Hmmmm
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>