TenTec
[Top] [All Lists]

[TenTec] Terminal Program

To: <tentec@contesting.com>
Subject: [TenTec] Terminal Program
From: aluscre@neo.rr.com (aluscre)
Date: Fri, 12 Nov 1999 21:05:34 -0500
Bob I have been using a program called KAM-PRG. KAM-PRG is public domain
software designed for CW,RTTY,ASCII & AMTOR. It is a DOS program with
very low system requirements but runs fine under WIN95. I have tried
many KAM terminal programs and this was one of best. I have no internet
address for availability but I can give you authors snail mail address
and/or can e-mail it to you as an attachment (it's not very big).
Author:
            Clermont Computer Consultants
            29 N. Ravenwood Drive
            Cape May Court House, NJ  08210
            (609) 624 0076.

--
|--------------------------|
| Anthony A. Luscre    |
|  KA8NRC         |
|        Stow, Ohio    |
|--------------------------|

Robert Weingaertner wrote:

> Hi gang,
>
> I run a Kantronics KAM (the original with some upgrades) with my
> Paragon I for the digital modes. I've run it with an old PC
> portable (4.9 MHz 8088). Alright laugh, but running YAPP as
> a terminal its adequate.
>
> I also have an IBM Aptiva running Windows 95. Its time to switch
> the KAM over to the new PC. Can anyone recommend a decent terminal
> program that will run in Windows? I tried a couple from the QRZ
> CD ROM but I either can't unzip them or they don't work properly.
>
> OR, should I forget about RTTY, AMTOR and PACTOR and just run CW?
>
> Thanks!
>
>                         Bob WB2VUF
>
>






--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>