reggie,
whoops... i wasn't clear... too many things with too many ports with too
much nomenclature!
i guess on the tentec peg, the aux port *is* where you plug in the remote
tuning knob, and the accessory port is where you can hook up audio in/out
and ptt. that's the one i was talking about (the one that tentec
thoughtfully supplied the cable with the 4 RCA jacks).
i don't have my manual here so i can't say for sure whether the audio input
to the peg there is at 8 or 500 or ?? ohms. if it's 8, i'll be surprised.
but then it wouldn't be the first time.
sorry for the confusion!
kenb
----- Original Message -----
From: Reginald Mackey sr. <k6xr@earthlink.net>
To: Ken Brookner <kenb@brookner.com>
Sent: Monday, November 15, 1999 11:47 AM
Subject: Re: pegasus and psk31
> wow! I misunderstood you! I thought you meant the accessory input. I'll
> have to check the aux input.
>
>
> Reggie, (k6xr) Southwest Bakersfield, Ca.
>
>
>
>
> ----- Original Message -----
> From: Ken Brookner <kenb@brookner.com>
> To: <tentec@contesting.com>
> Cc: <k6xr@earthlink.net>
> Sent: Sunday, November 14, 1999 10:08 PM
> Subject: re: pegasus and psk31
>
>
> > reggie, i've been doing some pks31 with my pegasus. am using the aux
> input
> > on the pegasus, through a pad and 1:1 transformer to the line out on the
> > sound card. audio is adjusted such that the alc never quite lights -- i
> > could probably bump the audio up a little but so far have not needed to.
> >
> > be aware that, at least on mine, the mic gain control in the software
does
> > not effect the aux-in audio.
> >
> > have fun!
> > kenb, n5lpi/7
> > _______________________________
> > kenb@brookner.com
> > kenb@qatrix.panther.net
> > ...!rwsys!rowdy!qatrix!kenb
> >
> >
> >
>
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|