TenTec
[Top] [All Lists]

[TenTec] Hercules II Power Source

To: <tentec@contesting.com>
Subject: [TenTec] Hercules II Power Source
From: kh7m@hsa-kauai.net (Jim Reid)
Date: Fri, 31 Dec 1999 13:33:16 -1000
Gregg, K7KJ wrote:

> Jim:
> Just checked my 10 year old Hercules II/9420 PS on 7.025 into a dummy
> load using a VFD wattmeter: 26w in/ 540w out, 35w in/ 600w out, and will
> put out well over 600w (with the red LED on!). Keep in mind the 9420
> puts out 14.0 vdc, no load.

Now that is interesting,  Gregg.  That is exactly 13 dB gain on the
first pair,  and 12.3 dB on the second.  My numbers show my
solid state amp is producing only about 8 dB gain,  hmmmmm?
Yes,  84 in, 570 out is only a numerical gain of 6.8x's, or some
8.3 dB.  I can crank the Astrons up to 14 vdc,  but probably won't.

Herc. II typicals from the TT web page:

"RF Power: 1000 watts input. 500/600 watts output, depending 
on frequency and load impedance. 

Drive Power: 65 to 80 watts typical for 500 watts output. 

(Or a typical Herc.  gain of around 9 dB down to only 7.9dB,
with 80 in and 500 out)

Primary Power: RF deck, 12 to 14 volts at 100 amps, maximum"

Your Herc. II at 13 dB gain is a real "hot one",  Gregg,  hi.

Does the 9420 PS have a current meter,  if so,  how much
current is being drawn?

Happy New Year and 73,  Jim,  KH7M
On the Garden Island of Kauai,  temp outside:  75 F.


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>