TenTec
[Top] [All Lists]

[TenTec] Omni-C vs. '930; hisssssss

To: <tentec@contesting.com>
Subject: [TenTec] Omni-C vs. '930; hisssssss
From: agulseth@juno.com (Al Gulseth)
Date: Thu, 03 Feb 2000 22:04:21 EST
Keith,

You wrote...

>Good thought.  It reminded me of an in-line volume control I had >for my
headphones.  I dug it up and put it in, and all is better >now.  By
running the AF gain higher, the hisssss is masked....

Hmmm. It just dawned on me -- is the hiss from the RF/IF chain, or is the
real culprit the AF output IC or preamp, etc.? If the noise were being
generated before the AF gain control increasing the AF gain setting
wouldn't affect it; but increasing the AF gain control setting would
improve signal-to-noise ratio in anything AFTER the AF gain control if I
am thinking right.

73,

Al  WB5JNC

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>