TenTec
[Top] [All Lists]

[TenTec] d-104 and omni V

To: <tentec@contesting.com>
Subject: [TenTec] d-104 and omni V
From: cshyde@yahoo.com (Carl Hyde)
Date: Mon, 20 Mar 2000 08:01:59 -0800 (PST)
The D-104 mics are made for CB radios. They have a low
frequency roll-off from about 1 KHz on down. They also
boost higher frequencies. In other words they suck!!!
But if you insist on using one there is a company that
for $125.00 will make a D-104 sound like a real ham
radio microphone. Or you can remove that nasty old
Astatic element and put a Ten Tec element inside and
wire it apropriately.  (For some reason people like
the looks of a D-104) Otherwise get a Ten Tec mic for
your Ten Tec rig. I've tried every conceivable mic and
find the TTs are still the best.  

--- Richard Bunn <rrbunn@tidalwave.net> wrote:
> 
> Allan - N5CA wrote:
> 
> > Hello,
> > I acquired an astatic d-104 mic.
> > I am getting reports that it too many highs. They
> say it sounds like
> > I am holding my nose when I talk.
> > Any help is appreciated.
> > 73
> >
> > C. Allan Allmand - N5CA
> > n5ca@qsl.net
> > http://www.qsl.net/n5ca
> >
> > --
> > FAQ on WWW:              
> http://www.contesting.com/tentecfaq.htm
> > Submissions:              tentec@contesting.com
> > Administrative requests: 
> tentec-REQUEST@contesting.com
> > Problems:                
> owner-tentec@contesting.com
> > Search:                  
> http://www.contesting.com/km9p/search.htm
> 
> My guess is that you have a mismatch in the mic to
> the rig.  The D-104
> is usually set up with a high impedance element and
> the Ten-Tec and most
> modern radios is looking for a low impedance, like a
> dynamic element.  I
> had the opposite problem when trying to use an MC-50
> mic on my Collins
> station.  I went to theAstatic 10ADL dynamic element
> but it to already
> has a transformer and is set up to be a high
> impedence mic.  WHen I
> tried it on my Kenwood and on my Paragon II,  I got
> the same reports you
> did.  Recommend you go with the Ten-Tec mic or other
> modern mic.
> 
> 73 Rick N4ASX
> 
> --
> FAQ on WWW:              
> http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests: 
> tentec-REQUEST@contesting.com
> Problems:                
> owner-tentec@contesting.com
> Search:                  
> http://www.contesting.com/km9p/search.htm
> 
> 

=====
Carl HYDE
W2CSH

__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>