TenTec
[Top] [All Lists]

[TenTec] Modifying the Centaur

To: <tentec@contesting.com>
Subject: [TenTec] Modifying the Centaur
From: ac5aa@juno.com (Duane A Calvin)
Date: Sat, 9 Sep 2000 18:22:11 -0500
Except for the Centurion, which is very quiet, also is "instant on" with
3-500ZG's- why buy another amp?  :-)

        73,  Duane   AC5AA

On Sat, 09 Sep 2000 19:12:48 +0000 alsopb <alsopb@gloryroad.net> writes:
> It seems that TenTec has cooling fan problems in most of their amps.
> 
> The Titan 425 also had a noisy "fan".  The cabinet seemed to be a
> sounding
> board.  
> 
> I don't understand why cooling can't be quiet.  My furnace fan makes
> less noise
> and cools a heck of a lot bigger volume.  It's just a matter of
> engineering.  
> 
> Sold Titan partially because of the fan noise.
> 
> 73 de Brian/K3KO
> 
> Duane A Calvin wrote:
> > 
> > Hi Jim,
> >         The fan noise is why I traded my Centaur in on a Centurion 
> amp.  The
> > Centaur does an excellent job, otherwise.  (and the Centurion 
> looks so
> > pretty next to the VI+!)
> >         I did not perform the surgery on mine, but I can tell what 
> my
> > "alternate" plan was.  You will find if you remove the case that 
> the fan
> > makes very little noise.  But hold anything in front of the fan 
> input
> > (use a Mouser backscratcher !) and you will hear the beginnings of 
> the
> > noise.  According to an acoustic/thermal engineer at my place of
> > employment who looked at it, TT simply mounted the fan too close 
> to an
> > obstruction (cabinet side) such that there is turbulence generated 
> at the
> > leading edge of the fan blades, and that is where the noise is 
> generated.
> >  This engineer recommended starting with punching round holes in 
> the side
> > of the case in the fan intake area.  If that didn't provide enough 
> noise
> > abatement, he recommended removing all the case material at the 
> fan
> > intake (and I would add, cover it with one of the kits available 
> in
> > Newark to filter the air and keep fingers and other large objects 
> from
> > finding their way into the fan or the case.)  This was not a 
> tested fix,
> > but this guy has a lot of experience on cooling fan noise 
> problems, and,
> > as I mentioned, removing the case will almost totally eliminate 
> the
> >

Duane A. Calvin, AC5AA
Austin, Texas
ac5aa@juno.com -or- ac5aa@earthlink.net
Day:  dacalvin@us.ibm.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>