Chuck
The RS-232 port on the Omni V requires no additional circuitry; it's all
set to go.
Al, K2ZN
Chuck Brudtkuhl wrote:
>
> Ok gang, save me the effort of disconnecting all those
> cables on the back of the Omni-V, so I can remove it to pull
> the top cover to "look-see" ......
>
> Is the DB-25 connector on the rear of the Omni-V active in a
> stock radio. Nowhere in the manual does it refer to the
> RS-232 Level Interface as being an option. On the other
> hand, it refers (in only one place) to this circuit as the
> Model 258 ... and the Model 258 was sold by TenTec as a
> seperate entity, but supposedly only for the Paragon I.
>
> Before I start wiring a cable for this (or trouble-shooting
> what I've connected), I'd like to know if this connector is
> even active!
>
> If it requires Model 258 interface (Board 81425) to be
> operative, does anyone have one for sale out there?
>
> 73 de Chuck
> waØroi
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/tentec
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|