Harry, Carter, es all
Checked my notes and the mod info that I have from Ten Tec was to change
R55 from 330K to 470 K and change R54 from 47K to 22K. Hope this is the
mod you had in mind.
73,
Troy, W6HV
----- Original Message -----
From: "Carter Grabarczyk" <k8vt@ameritech.net>
To: <DK2GZ@aol.com>
Cc: <tentec@contesting.com>
Sent: Friday, January 26, 2001 11:12 AM
Subject: Re: [TenTec] Heil Headset and OMNI 6+
>
>
>
> DK2GZ@aol.com wrote:
> >
> > Hello
> >
> > I using a Heil headset with the omni 6+.
> >
> > First: need very high mike-gain and processor-level
> > for moderate output
> >
> > Second: some people told me that there is a "brrrrr"
> > sound in the background on my audio
>
>
> Hi, Harry,
> Sorry that I cannot help with the "brrrr" sound. However, I do use a
> Heil headset with my Omni 6. When I first got the Heil, I experienced
> the same low gain problem you did. I called TT service on the telephone
> (easier for me than for you, presumably living in Germany). TT said they
> would call me back in an hour or two with an answer (after they talked
> to a design engineer). As promised, they did call and the answer was to
> change the value of (2) quarter watt resistors. This solved the low gain
> problem with the Heil. As this was 5 or 6 years ago and I don't have
> access to my notes right now, I'm sorry I cannot be more specific. Maybe
> someone else on the reflector can give you the details.
>
> Good luck!!
>
> 73/Carter/K8VT
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/tentec
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|