TenTec
[Top] [All Lists]

[TenTec] OMNI VI Receive Audio Mod.

To: <tentec@contesting.com>
Subject: [TenTec] OMNI VI Receive Audio Mod.
From: reid.w.simmons@intel.com (Simmons, Reid W)
Date: Fri, 9 Mar 2001 10:35:19 -0800
I did the mod last weekend (2-Caps, 1-Resistor).  My assessment is that the
audio sounds much fuller and more natural.

What I did was to "memorized" the sounds of several potentially long winded
rag chews on a couple different bands then performed the modification (gotta
work fast!), and then I listened to those conversations again and compared
what I heard.  A much better comparison of course would be to have two Omni
VIs one modified and one stock and evaluate the results.

I have also had the INRAD 2.8 filter in the 9 MHz IF for few years now and
that change made a very dramatic improvement in the balance of the sound
between USB and LSB, and operation of the PBT.

Reid, K7YX
Beaverton, OR


-----Original Message-----
From: Duane A Calvin [mailto:ac5aa@juno.com]
Sent: Monday, March 05, 2001 4:30 PM
To: tentec@contesting.com
Subject: Re: [TenTec] OMNI VI Receive Audio Mod.




Like that old auto mechanic story - "The part cost me 39 cents, but
knowing what part to replace cost you $150!

When mine arrives I'm going to install with the stock 2.4 kHz filters and
I also have the 2nd IF 1.8 kHz filter as well.  I don't want 2.8 kHz
filters in mine since about the only time I'm on SSB is a contest here
and there.  I'll report here how it seems to me once I get it in and
check it out.  (Subjective comments only since I have no measurement
equipment to go further.)

        73,  Duane


On Mon, 05 Mar 2001 01:12:33 -0500 Arthur Bernstein <n2ka@optonline.net>
writes:
> 
> Was just wondering. Regarding the audio mod for the OMNI VI from
> International Radio, is the whole mod. "kit" just 3 parts and some
> instructions?
> Also, anyone do it whose VI had the original filters (2.4 khz), not 
> the
> IRC's 2.8? If so, what did you notice? Is there any affect on CW, 
> that
> is negative? Hard to believe whole kit is only 3 little parts for
> $20.00??
> &3,
> Art, N2KA..
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> 
> 


Duane A. Calvin, AC5AA
Austin, Texas
ac5aa@juno.com -or- ac5aa@austin.rr.com
Day:  dacalvin@us.ibm.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com



--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>