TenTec
[Top] [All Lists]

[TenTec] RX-320/Pegasus Applications

To: <tentec@contesting.com>
Subject: [TenTec] RX-320/Pegasus Applications
From: cjm@qvssoftware.com (Carl Moreschi)
Date: Mon, 16 Jul 2001 11:36:05 -0400
John,

If you like to chase DX and work split frequency pileups, this is
a dynamite setup.  I set the pegasus on the dx station, turn on split,
turn on dual receive mode, and set my tuning knob for vfo b.
The rx320 will automatically follow the vfo b setting.
This allows me to tune the stations working the dx station and still
monitor the dx station.  When I find a station that just worked the
dx station, I am all set to transmit there.  More often than not,
I work the dx station right away doing this.

I also made my stereo headphones plug so I can have the left
ear listening to the pegasus and the right ear listening to the rx320.
This helps a lot to sort out who is who.


Carl Moreschi  N4PY
----- Original Message ----- 
From: "John Mead" <w9ow@yahoo.com>
To: <tentec@contesting.com>
Sent: Monday, July 16, 2001 11:15 AM
Subject: [TenTec] RX-320/Pegasus Applications


> 
> I am a Pegasus user who recently purchased an RX-220. 
> I use N4PY software and have noticed Carl's
> suggestions about using the RX-320 as a sub-receiver. 
> I am interested in folk's experiences in using the two
> rigs together.
> Tnx, John, W9OW
> 
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>