Hmm, that's interesting to know. The seller claimed
that he verified that the units worked, by powering
them "on the cigarette lighter"--I'm assuming he used
a non-current limited 12V supply to the battery pack.
Hope those EPROM's aren't toast! Maybe tonight I can
rig up a charger, and rebuild that battery pack, and
see if it works.
KB1CKT
--- ultrafixedwing@juno.com wrote:
> I have the original wall-wart that came with my
> unit. It is 13 volt dc at
> 50 ma. DO NOT put more than the 8.4 volts into that
> rig. It WILL destroy
> the eprom. Ten Tec does not have the eproms any more
> and cannot repair
> the rig. Use it very carefully. Also, do not power
> the rig with the 13
> volts applied to the battery pack.
> If you ca't get the manual from TT, I can make you a
> photo copy.
> They also tell you not to put the battery on with
> the rig turned on or
> the microprocessor may not work.
> Very finicky rig, but I get excellent audio reports.
> Paul
> KS2S
>
|