TenTec
[Top] [All Lists]

[TenTec] pegasus & hamscope

To: <tentec@contesting.com>
Subject: [TenTec] pegasus & hamscope
From: KA2UQW@aol.com (KA2UQW@aol.com)
Date: Sun, 25 Nov 2001 10:29:02 EST
Hi.

Am trying to interface the Hamscope program with the Peg primarily in cw mode.
I understand that the rig is to be keyed from the program, however I can only 
get it to do so in vox mode, which causes a jumpy and unusable cw note.  
Keying in other modes such as psk31 and rtty is really no problem, just cw.  
I thought that as the characters were typed the rig should key accordingly, 
being keyed through the com port.  All other rig controls from Hamscope work 
ok, just not the keying feature.
Any help would be appreciated.  

73's and thanks,  de Andy, KA2UQW

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] pegasus & hamscope, KA2UQW@aol.com <=