Hey, give the guy a break . . . is this really something that has to be on
the TenTec net or should it just be between you and Carl ? ? ? He sent out
email this late summer/early fall explaining this situation. You want free
updates of software forever for your original $25.00
It's not going to stop working (unlike Norton) . . . you can use what you've
got now, and if you don't need it, don't buy it . . . sheesh!
Sometimes I think the whiners will inherit the earth, or already have . . .
de WQ8Q
----- Original Message -----
From: "Jerry Harley" <wa2tti@worldlynx.net>
To: "Carl Moreschi" <n4py@earthlink.net>; "Tentec" <tentec@contesting.com>
Sent: Thursday, January 03, 2002 2:14 PM
Subject: [TenTec] Re: N4PY Pegasus/Jupiter Software is expiring
> When I purchased your software nothing was said about yearly
> registration. Your starting to sound like Microsoft and Norton. I find
> the software very nice but have no interest in subscribing for any
> dollar amount let loan $35. As I use my Jupiter almost from the front
> panel I'll pass. Jerry
>
> Carl Moreschi wrote:
> >
> > Your registration for the N4PY Pegasus/Jupiter Control Program
> > will expire at the end of the January. In order to continue
> > to get new updates at 1 to 2 month intervals, you need to renew
> > your annual registration. The registration amount is $35.00
> > in US Dollars. You can either send a personal check to
> >
> > Carl Moreschi
> > 173 Cody's Way
> > Franklinton, NC 27525
> >
> > or you can use PayPal. For PayPal, just send the $35 via PayPal
> > to my email address of n4py@earthlink.net
> >
> > Below is a current product listing.
> >
> > In order to get my Pegasus, Jupiter, rx320, rx331, or rx340
> > software, you must be a registered user. Over the past year,
> > there has been a new software version of the Pegasus/Jupiter
> > software each month. As a registered user, you will receive
> > free updates as they come out each month for a period of 1 year.
> > The updates are emailed to you as they come out. There is no
> > website. The Pegasus/Jupiter software has been reviewed in the
> > May 2001 QST on page 65. There are also several reviews on my
> > software at www.eham.net
> >
> > To become a registered user for my Pegasus/Jupiter software, mail
> > a check for $35 in US dollars to
> >
> > Carl Moreschi
> > 173 Cody's Way
> > Franklinton, NC 27525
> >
> > Make the check payable to Carl Moreschi and PLEASE
> > include your EMAIL address. You can now also use PayPal.
> > Send the money to n4py@earthlink.net to use PayPal.
> >
> > If you do not have internet access and want the software on
> > diskette, there is an additional charge of $10.00 for
> > a diskette mailed directly to you.
> >
> > Products:
> >
> > Pegasus/Jupiter Software
> > Annual Registration $35.00
> > This is the N4PY Pegasus Control Program.
> > It will control a Pegasus or Jupiter. Additionally,
> > it will allow an RX-320 to be used as a sub-receiver
> > to the Pegasus/Jupiter with the RX-320 following VFO B.
> > This allows for full dual receive capabilty for DXer's.
> > The program will also allow two Pegasus/Jupiter's to run
> > together with one acting as the sub-receiver. The
> > software also allows the seemless use of transverters
> > for the VHF/UHF bands with the display showing
> > the transverter frequency.
> >
> > RX-320 Software
> > Annual Registration $25.00
> > This is the N4PY RX-320 Control Program.
> > It is very similar in appearance to the Pegasus/Jupiter
> > Software. It allows the use Ten-Tec's 6 and 2 meter
> > transverters. It has provisions to allow the RX-320
> > to be used as a sub-receiver for the Omni VI, Omni V.9,
> > and the Paragon II.
> >
> > RX-331/RX-340 Software
> > First time Registration $100.00
> > Annual renewal registration $35.00
> > This software marries the RX-331 or RX-340 top of
> > the line receivers with a Pegasus or Jupiter to allow
> > full transceive operation. The RX-331/RX-340 becomes
> > the main receiver with the Pegasus/Jupiter receiver
> > following VFO B to allow full dual receive. This is
> > a dynamite setup representing the ultimate transceiver
> > configuration. The software will also allow the RX-331
> > or RX-340 to be used standalone without a Pegasus or
> > Jupiter. There is a small modification required to the
> > Pegasus/Jupiter to allow the two receivers to share the
> > same antenna. Also, a fairly simple interface box must
> > be constructed for the software to control muting between
> > the two radios. There is a review of this software at
> > www.eham.net under HF Transceivers "Ten-Tec RX340/Pegasus
> > System".
> >
> > Carl Moreschi N4PY
> > Franklinton, NC
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|