[TenTec] QRP WITH OMNI VI

[VE1BN@aol.com (VE1BN@aol.com)]

Hi Mark -

My OMNI 6+ at minimum power delivers about 2 watts.  I feed a TT 1208 
transverter with it at 5 watts, and pencil-marked the knob setting.   It is 
stable, meaning no variation (change) in output.  I measured the output using 
a Bird wattmeter into the 50 Ohm load.  

Thought you might be wise to do the same, just to make sure of what your 
rig's power output is at the minimum (anticlockwise) setting of the RF power 
knob.  Sure is better than guessing.  

73 -  Don    ve1bn@aol.com