Exactly!!, mine performed well and is what had me stumped when I went to
the Jupiter with it's low audio transmit using the Heil. My settings were
identical to yours on my OmniV and VI
jeff
ve3ios
----- Original Message -----
From: <VE1BN@aol.com>
To: <ve3ios@servers.ca>; <tentec@contesting.com>
Sent: Thursday, May 16, 2002 7:39 AM
Subject: Re: [TenTec] Heil HC-5 and Omni V
> Hi Jeff -
>
> I have been using the Heil BM-10 boomsets for a long time with both my
> Paragon and OMNI 6+ rigs, and use them "barefoot", no preamps needed.
Don't
> quite understand why others should have poor results with theirs.
>
> I never found the HC4 or HC5 element too low in output. These mikes work
very
> well for the close-talking they were designed for. No problem with
background
> noise which is exactly what I want. Audio gain pots on either rig never
> exceed the 10 o'clock position. I don't talk loudly but use my processor
at
> 10 o'clock. Ten-Tec processors sound "normal", no distortion introduced,
if
> used properly, from reports I've received.
>
> Much like what you do, Jeff?
>
> 73 - Don ve1bn@aol.com
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
|