Steve,
I recently sold my Omni V with the same FM board (and the instruction sheet
went with it). However, as I remember there are two or three cables that
come with the board that need to be connected to the existing boards. I
remember one piece of mini coax that I had trouble routing as it wasn't long
enough to reach it's destination going through the main cable routing hole
in the chasis. I had to use a smaller notch that didn't have the plastic
liner (the cables going through the notch went through a grommet at that
point, but there wasn't an easy way to get this cable through that grommet.
73,
Mark
----- Original Message -----
From: "Amateur Radio Station W5CIA" <w5cia@arrl.net>
To: <tentec@contesting.com>
Sent: Tuesday, August 13, 2002 9:45 AM
Subject: [TenTec] Model 256 FM Board Help
> I'm looking for the instruction sheet for the 256 FM board. Does anyone
know
> if it came with jumpers or do all the jumpers already exist in the Paragon
> for connection?
> Thanks
> STEVE
> W5CIA
> w5cia@arrl.net
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|