>From: "R. Eric Sluder" <resluder@coserv.net>
>To: tentec@contesting.com
>Subject: Re: [TenTec] Paragon VFO Problem
To: <tentec@contesting.com>
>Date: Mon, 26 Aug 2002 08:42:33 -0500
>
>In a former job, I had a standby diesel generator fail to start. I called
>the service company out to take a look at it. The tech needed to
>verify that the fuel pump was bad based on his analysis. So... he
>opened up the intake and sprayed WD-40 up it while cranking the
>starter. To my amazement, the engine started and he continued to run
>that engine on WD-40 for over a minute by just squirting it up the intake
>at regular intervals to affirm the engine was fine. It was very
>interesting
>to see that huge diesel chugging along on WD-40, but it really worked.
>
>The moral of the story is... it really is just kerosene (proven) and I
>changed lubricants after that demonstration. The chap who recommended
>"Break Free CLP" is right on the money. You won't find a better
>lubricant!
>
>73,
>R. Eric Sluder
>W5WLW
>
I found the "Break Free CLP" available at WalMart Supercenter for a very
reasonable price for a 4 oz size can.
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
|