TenTec
[Top] [All Lists]

[TenTec] Jupiter software

To: <tentec@contesting.com>
Subject: [TenTec] Jupiter software
From: wa2tti@qsl.net (Jerry Harley)
Date: Wed, 09 Oct 2002 14:41:17 -0400
Or a Triton II for $200.  I have one for 200

n4lq@iglou.com wrote:

>Yea but if you had saved $300 and bought a Pegasus then you couldn't have 
>run the Pegasus in Jupiter mode either and then where would you be? Of 
>course, you could have taken the $300 and bought a Triton IV which 
>requires no software and have 2 rigs....
>
>-----Original Message-----
>From: "Scott Johnson" <scott@wowpage.com>
>To: <tentec@contesting.com>
To: <tentec@contesting.com>
>Date: Wed, 9 Oct 2002 12:48:34 -0400
>Subject: [TenTec] Jupiter software
>
>  
>
>>OK, here's a question I can't seem to find the answer to anywhere.  The
>>Jupiter programmer's guide says that there are two modes for
>>controlling the
>>radio.
>>
>>Pegasus emulation mode makes the Jupiter look like a Pegasus -- it uses
>>the
>>Pegasus command set and DISABLES the front panel, while Jupiter mode
>>uses a
>>separate Jupiter command set and DOES NOT DISABLE the front panel.
>>
>>Several people have written control software that takes advantage of
>>Pegasus
>>mode.  Is there no oftware that uses Jupiter mode, so that I can retain
>>front panel control and display?  If I wanted my front panel disabled,
>>I
>>would have bought a Pegasus and saved $300. :)
>>
>>I tried the Jupiter-specific version of PegasusPlus, but it too puts
>>the
>>radio in Pegasus mode.
>>
>>Anyone know about something I missed?  Any ideas appreciated.
>>
>>     Scott
>>
>>--
>>Scott Johnson (scott@wowpage.com) (s.johnson@klotzdigital.com)
>>ICQ: 30730876 ICBM: N33 45 50.6 W84 49 31.3 (+- 3dB)
>>
>>_______________________________________________
>>TenTec mailing list
>>TenTec@contesting.com
>>http://lists.contesting.com/mailman/listinfo/tentec
>>
>>    
>>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>.
>
>  
>



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---

<Prev in Thread] Current Thread [Next in Thread>