I have the line output fed to the sound card and use
the computer speakers. When the phone rings or
whatever I grab the computer speaker volume control or
on/off switch.
Dave, VE1ADH
--- Scott Johnson <scott@wowpage.com> wrote:
> Mark,
>
> I like controlling the radio from the computer, but
> sometimes, I need to
> change the volume quickly (like when the phone
> rings), and grabbing a knob
> is MUCH faster than fumbling for a slider with the
> mouse. I also like a
> KNOB for my VFO ... trying to adjust a VFO with a
> mouse is like trying to
> peel M&M's.
>
> If the Pegasus mode would just leave the VFO knob
> and AF gain available, I'd
> be totally happy.
>
> Scott
>
> --
> Scott Johnson (scott@wowpage.com)
> (s.johnson@klotzdigital.com)
> ICQ: 30730876 ICBM: N33 45 50.6 W84 49 31.3 (+- 3dB)
>
> > -----Original Message-----
> > From: Mark Erbaugh [mailto:mark@microenh.com]
> > Sent: Thursday, October 10, 2002 10:33 AM
> > To: Scott Johnson; tentec@contesting.com
> > Subject: Re: [TenTec] Jupiter software
> >
> >
> > Scott,
> >
> > The Jupiter mode was added much more recently than
> the Pegasus mode (which
> > was in there from the beginning). The main use of
> the Jupiter mode is so
> > that you can use the front panel to control the
> radio and have a
> > logging or
> > contest program get information from the radio.
> Many of these
> > programs don't
> > 'control' the Jupiter, they just get the freqency
> and mode.
> >
> > Are you interested in being able to have it so you
> can control the Jupiter
> > from either the computer or the front panel at the
> same time?
> >
> > Mark
> >
> > ----- Original Message -----
> > From: "Scott Johnson" <scott@wowpage.com>
> > To: <tentec@contesting.com>
> > Sent: Wednesday, October 09, 2002 12:48 PM
> > Subject: [TenTec] Jupiter software
> >
> >
> > > OK, here's a question I can't seem to find the
> answer to anywhere. The
> > > Jupiter programmer's guide says that there are
> two modes for controlling
> > the
> > > radio.
> > >
> > > Pegasus emulation mode makes the Jupiter look
> like a Pegasus -- it uses
> > the
> > > Pegasus command set and DISABLES the front
> panel, while Jupiter
> > mode uses
> > a
> > > separate Jupiter command set and DOES NOT
> DISABLE the front panel.
> > >
> > > Several people have written control software
> that takes advantage of
> > Pegasus
> > > mode. Is there no oftware that uses Jupiter
> mode, so that I can retain
> > > front panel control and display? If I wanted my
> front panel disabled, I
> > > would have bought a Pegasus and saved $300. :)
> > >
> > > I tried the Jupiter-specific version of
> PegasusPlus, but it too puts the
> > > radio in Pegasus mode.
> > >
> > > Anyone know about something I missed? Any ideas
> appreciated.
> > >
> > > Scott
> > >
> > > --
> > > Scott Johnson (scott@wowpage.com)
> (s.johnson@klotzdigital.com)
> > > ICQ: 30730876 ICBM: N33 45 50.6 W84 49 31.3 (+-
> 3dB)
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > >
> http://lists.contesting.com/mailman/listinfo/tentec
> > >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca
|