TenTec
[Top] [All Lists]

[TenTec] Filter questions

To: <tentec@contesting.com>
Subject: [TenTec] Filter questions
From: ac5p@juno.com (Mike J Maloney)
Date: Wed, 4 Dec 2002 21:01:03 -0600
Just curious, will the Corsair II handle the 500hz - 8 pole filter(#217)
in the 9MHz front end?  Perhaps this would be more advantageous for a
serious cw only op than the #220 or 218?   
73, Mike, ac5p

On Wed, 04 Dec 2002 07:32:27 -0500 Bwana Bob <wb2vuf@gti.net> writes:
> Max,
> 
> I added the 8 pole filter to my Corsair and noticed an immediate
> difference. The skirt selectivity is greatly improved. The passband
> tuning is much sharper: a little tweak of the PBT and adjacent 
> channel
> QRM slides right off the skirts and into the mud. On cw, the effect 
> is
> less noticeable if you run the 500 Hz filter, but it should be 
> improved
> because the 8 pole filter will keep QRM from reaching the 500 Hz 
> filter.
> 
> 
>                               73,
> 
>                               Bob WB2VUF
> 
> Max Moon wrote:
> > 
> > Hello,
> > I recently got a Corsair I for CW (it's all I do, I never learned 
> how to use
> > SSB). I was reading the manual today and it says that I can 
> improve the
> > Corsair's performance by replacing the standard 2.4 kHz 4-pole 
> filter at the
> > 9-MHz IF with a TT#220, an 8-pole 2.4 kHz ladder filter. My guess 
> is that
> > they mean SSB performance will improve. But I never use a 2.4kHz 
> bandwidth
> > for anything.
> > 
> > (In addition to the standard 4-pole filter, the rig came with one 
> of the
> > optional 6.3 MHz filter slots filled with an 8-pole 1.8 kHz 
> (TT#288) which
> > is my regular choice. I added TT#282 & 285 (500 and 250Hz) for 
> when the 1.8
> > kHz is too wide.)
> > 
> > My questions are: Would the rig's performance improve if instead 
> of using
> > the TT#220 mentioned in the manual, I replaced the 9MHz IF 
> standard 4-pole
> > filter with the TT#218, an 8-pole 1.8kHz filter? Or are there 
> other filter
> > options that I should consider? Or am I pretty much already in 
> Corsair I
> > heaven with the set-up I've already got?
> > 
> > Thanks very much.
> > 
> > Max, k0max
> > 
> > Or do you
> > 
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


<Prev in Thread] Current Thread [Next in Thread>