Mike,
The Omni VI and VI+ are capable of doing both Iambic A mode and Iambic B
mode keying with the internal keyer. The "B" mode adds a "dit".....Go to
the menu system and select menu "2". The item you are looking for shows up
in the menu as I COdE, it will have either a letter "A" or "B" and I bet it
is set up for "B" mode. Change it to "A" mode. I think you will find that
the EXTRA dit will go away.
I have a sheet here somewhere that explains the difference in the Iambic A
and B modes, just can't find it right at the moment, which is normally the
case. Try you menu option and see if the I COde isn't set up for "B" mode.
Hopefully, the extra dit is coming from the menu selection, at least that is
the easiest thing to correct.
Mike - KC8WR
----- Original Message -----
From: Mike J Maloney <ac5p@juno.com>
To: <tentec@contesting.com>
Sent: Saturday, January 04, 2003 9:22 AM
Subject: [TenTec] extra dits from Omni 6+?
> I recently acquired an Omni 6+. I enjoy using a bug for operating around
> 25wpm. I have noticed that the rig "throws" in extra dits randomly.
> Very frustrating when I know I'm not making them. The key is well
> adjusted and does not do this on other rigs or a cpo. There is no
> problem when using an external or the internal keyer.
>
> Has any one else experienced this phenomonen and/or have any ideas for
> the cause and solution?
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|