.01uF bypass caps solved all the RFI problems I had with my station (two
TS-850S/AT's and an Argosy 525 (plus other "on-the-shelf" rigs)). Tried
everything else (chokes, isolators, prayed for divine intervention, etc) and
lived with RFI (really severe on 20M) for a year before putting the caps in.
Then, like magic, everything cleared up.
I recently picked up an MX-802a last month, but haven't had the time to
"integrate" it yet. Still need to build a small 20dB pad to drive the mic
and make a couple of cables. Should work great once I get everything
together.
Try the caps and see if that helps. "Hot" to shield/ground on coax type
cables, "+" to shield/ground and "-" to shield/ground on shielded cables.
Make sure the shield is grounded! Another option might be a line isolator
between the radio and the mixer.
73 & GL,
- Aaron Hsu, NN6O (ex-KD6DAE)
{nn6o}@arrl.net
{athsu}@unistudios.com
No-QRO Int'l #1,000,006
. -..- - .-. .- ".... . .- ...- -.--"
-----Original Message-----
From: tlogan7@cox.net [mailto:tlogan7@cox.net]
Sent: Monday, March 03, 2003 6:08 AM
To: w7ts@attbi.com; tentec@contesting.com
Subject: Re: [TenTec] RFI and Behringer MX-602a
Hi Ken -
I suspect that's what is happening, but last time I started playing with
with chokes for RFI it drove me crazy - suppose that's why I'm not reall
motivated to go on the "Choke Chase" heh heh. Thanks Ken!!
73/Tim
|