Well it looks like I may have a problem then. The Monitor is at 100 and no
attn is selected. HHmmmm.
Tnx
Greg
----- Original Message -----
From: John Sheeley
To: tentec@contesting.com
Sent: Saturday, May 17, 2003 6:59 PM
Subject: Re: [TenTec] Orion Software v1.341
Greg
If your Monitor is set at 100% and you don't have any
attenuation selected you should have plenty of
Monitor audio . I do
de John WB4QDA
--- Greg Fischer <ab7r@direcway.com> wrote:
> Same problem here with the pitch adjustment.
> Also...and this may have been mentioned previously,
> but is it normal for the monitor audio to be so very
> low? I have it all the way up and can barely hear
> myself in the headphones or the speaker. Using heil
> headset.
>
> Thanks
> Greg
> AB7R
>
> ----- Original Message -----
> From: John Sheeley
> To: tjednacz@ieee.org ; tentec@contesting.com
> Sent: Saturday, May 17, 2003 3:28 PM
> Subject: RE: [TenTec] Orion Software v1.341
>
>
> I found the same bug that you described . I am
> sure
> there will be a quick fix as sooe as we let TenTec
> know Just holding the spot button and turning the
> multi knob still seems to work with no extra
> digits
>
> 73
> John WB4QDA
>
>
> --- Thomas Jednacz <tjednacz@ieee.org> wrote:
> > Same thing here Earl. Took me a few seconds to
> > understand what was going on.
> >
> > 73, Tom, W7QF
> >
> > -----Original Message-----
> > From: tentec-bounces@contesting.com
> > [mailto:tentec-bounces@contesting.com]On Behalf
> Of
> > k6se@juno.com
> > Sent: Saturday, May 17, 2003 4:50 PM
> > To: tentec@contesting.com
> > Subject: [TenTec] Orion Software v1.341
> >
> >
> > I just loaded software update v1.341 into my new
> > Orion. It fixed two or
> > three bugs I noticed in v1.337, but it
> apparentent
> > introduced a new one.
> >
> > One of the bugs the new version apparently fixed
> was
> > the 10Hz difference
> > in Sidetone Pitch setting and the Spot tone. By
> > fixing that, it looks
> > like they goofed on the Sidetone Pitch display
> when
> > you're setting it to
> > the desired pitch. With that menu item
> selected,
> > when you rotate the
> > Multi knob the displayed pitch becomes 5 digits
> > long. The first three
> > digits are the actual pitch and the last two
> digits
> > are left there from
> > whatever the last two digits were before you
> rotate
> > the Multi knob.
> > Exiting from the menu and then returning to it
> > displays the correct new
> > pitch setting and does the same 5-digit thing
> when
> > you rotate the Multi
> > knob.
> >
> > At least that's what V1.341 does on my Orion.
> Can
> > you other Orion owners
> > with v1.341 loaded confirm this on yours?
> >
> > 73, de Earl, K6SE
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> >
> http://lists.contesting.com/mailman/listinfo/tentec
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> >
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
> http://search.yahoo.com
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
>
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|