TenTec
[Top] [All Lists]

[TenTec] RF Feedback on Omni VI (opt 3)

To: <tentec@contesting.com>
Subject: [TenTec] RF Feedback on Omni VI (opt 3)
From: ken.d.brown@verizon.net (Ken Brown)
Date: Tue May 20 00:16:32 2003
Hi Mark,

While it is true that a good ground is important, you should be able to 
make the radio transmit into a test load without any RF feedback into 
your mic audio. I suspect that there is something wrong besides just a 
poor ground system if you cannot do that. I suggest checking very 
carefully all of the coax lines you are using. In fact eliminate all but 
the cable straight from the radio to the dummy load. And carefully 
inspect the microphone cable and connectors. Remove any other extraneous 
connections to the radio, such as connections to computers. Start with 
the basics and see if you have a problem. You have another radio to 
listen with, use headphones, the kind that cover your ear, so you don't 
make a feedback path from your monitor system. If with the simple setup 
of just Radio, power supply, microphone and test load, you still get RF 
feedback, then something really is wrong, and a better ground probably 
will not fix it.

Ken N6KB


<Prev in Thread] Current Thread [Next in Thread>