Oh no ! Not..... the BLACK SCREWS !!! :)
73 de Gary, AA2IZ
----- Original Message -----
From: <AC5E@aol.com>
To: <tentec@contesting.com>
Sent: Saturday, June 07, 2003 11:59 AM
Subject: Re: [TenTec] Black machine screws
> If you can find some plain (unplated) steel screws that will fit you can
use
> either gun blue or parkerizing solution to blacken them to any degree
desired.
> Both should be avaliable at any gun shop or sporting goods store - as well
as
> an aluminum blackening compound that works fairly well. .
>
> After all, commercial "black" screws are usually plain steel screws that
have
> had a dose of phospatizing to blacken them.
>
> 73 Pete Allen AC5E
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|