TenTec
[Top] [All Lists]

[TenTec] Hiss and click on Orion sidetone

To: <tentec@contesting.com>
Subject: [TenTec] Hiss and click on Orion sidetone
From: n4py@earthlink.net (Carl Moreschi)
Date: Wed Jun 25 18:31:12 2003
It sounds like your headphones are 8 ohms.  I suggest either adding a 100
ohm pad in series with each headphone or get 32 ohm headphones.  The 100 ohm
resistors can added right in the headphone jack.  Just get 2 1/4 watt 100
ohm resistors, and put each  on in series with the non-grounded side wire
going to each headphone.

Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Michael A. Newell, WB4HUC" <mnewell1@austin.rr.com>
To: <tentec@contesting.com>
Sent: Wednesday, June 25, 2003 9:52 PM
Subject: Re: [TenTec] Hiss and click on Orion sidetone


> Yes, mine had the clicks, don't know about the hiss.
>
> --
> Mike - WB4HUC
> Austin, TX
>
> ----- Original Message -----
> From: "Joe W2KJ" <w2kj@bellsouth.net>
> To: <TenTec@contesting.com>
> Sent: Wednesday, June 25, 2003 3:57 PM
> Subject: [TenTec] Hiss and click on Orion sidetone
>
>
> > Howdy folks:
> >
> > Just got my Orion after an interminable wait and finally read
> > enough to put it on the air.
> >
> > I notice a "hiss" and a "click" on the sidetone when each
> > character is keyed.
> >
> > I am using the Heil Micro-pro headset and have tried other
> > headsets of varying impedance to no avail.
> >
> > The sidetone through the speaker is pure with no clicks/hiss.
> >
> > Does anyone else notice these problems when keying their Orion
> > in CW when using a headset????
> >
> >                                             73, Joe W2KJ
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>