Well, I forgot to mention, MixW will also control the Argonaut using the
Jupiter setting and changing the baud rate to 1200. There are several
freebie programs out there for the Jupiter. As long as you can change the
baud rate to 1200, then you can use those programs to control the Argonaut.
Can't remember if the TenTec Pegasus program will allow you to set the baud
rate, if so, that would work too.
-------Original Message-------
From: tentec@contesting.com
Date: Wednesday, September 03, 2003 10:28:40 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Argo V control
Duffy,
But that's only if you have the control software such as N4PY running.
Mark
----- Original Message -----
From: "J. D." <duffyb01@fuse.net>
To: <tentec@contesting.com>
Sent: Wednesday, September 03, 2003 10:05 PM
Subject: Re: [TenTec] Argo V control
> The Argonaut V can be controlled with the same software as the Orion and
the
> Jupiter/Pegasus. N4PY confirmed this as did Nick creator of MixW. The
only
> difference is that you can only communicate with the Argonaut V at 1200
baud
>
>
> Duffy
> www.wb8nut.com
>
> -------Original Message-------
>
> From: tentec@contesting.com
> Date: Wednesday, September 03, 2003 9:11:11 PM
> To: tentec@contesting.com
> Subject: Re: [TenTec] Argo V control
>
> Marty,
>
> The Argo has it's own protocol. I don't think it emulates any other radio
> (even other TenTec's). You can download the protocol specifications from
the
> web at
>
> http://www.rfsquared.com/ArgoV/ArgoVmain.htm
>
> It's called the Programmer's Reference Guide.
>
> 73,
> Mark
>
> ----- Original Message -----
> From: "Martin Hartwell" <chartwell@worldnet.att.net>
> To: "tentec mail list" <tentec@contesting.com>
> Sent: Wednesday, September 03, 2003 3:24 PM
> Subject: [TenTec] Argo V control
>
>
> > Hi
> >
> > I know that once I order Carl's software I can control my Argo V, but
> > what does it emulate, the kenwood? Seems I have heard that. In another
> > way to putting it, if I already have a software package that works on
> > some other rigs what might work here. I know when I had my K2, if I told
> > it I was connected to a kenwood it should work.
> >
> > Any ideas?
> >
> > Marty
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> .
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|