The Argonaut V can be controlled with the same software as the Orion and the
Jupiter/Pegasus. N4PY confirmed this as did Nick creator of MixW. The only
difference is that you can only communicate with the Argonaut V at 1200 baud
Duffy
www.wb8nut.com
-------Original Message-------
From: tentec@contesting.com
Date: Wednesday, September 03, 2003 9:11:11 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Argo V control
Marty,
The Argo has it's own protocol. I don't think it emulates any other radio
(even other TenTec's). You can download the protocol specifications from the
web at
http://www.rfsquared.com/ArgoV/ArgoVmain.htm
It's called the Programmer's Reference Guide.
73,
Mark
----- Original Message -----
From: "Martin Hartwell" <chartwell@worldnet.att.net>
To: "tentec mail list" <tentec@contesting.com>
Sent: Wednesday, September 03, 2003 3:24 PM
Subject: [TenTec] Argo V control
> Hi
>
> I know that once I order Carl's software I can control my Argo V, but
> what does it emulate, the kenwood? Seems I have heard that. In another
> way to putting it, if I already have a software package that works on
> some other rigs what might work here. I know when I had my K2, if I told
> it I was connected to a kenwood it should work.
>
> Any ideas?
>
> Marty
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|