What kind of a circuit are you using to key the rig? Also which are you
using to actually activate the keying circuit to key the radio - the RTS or
the DTR?
Duffy
-------Original Message-------
From: tentec@contesting.com
Date: Sunday, October 05, 2003 1:28:47 AM
To: TenTec List (E-mail)
Subject: [TenTec] PSK and Argo V help?
I'm attempting to get my Argo V on the air with PSK31. I have connected the
Auxiliary cable to the sound card and I'm copying PSK without difficulty. I
also have the rig connected to the PC via a serial cable (COM3).
My problem is getting the PTT to function using the serial RTS/DTR mode.
The software indicates that the appropriate tones are being generated but
there's no RF unless I manually hit my foot switch and activate the PTT.
The software (PSK31 Deluxe) is set for PTT via the COM3 RTS/DTR lines.
I've tried the VOX route but I haven't found the settings that avoid a
"choppy" signal.
Any insight would be appreciated. Thanks.
73,
Rick
VE7ASR
Web site: http://www3.telus.net/ve7asr
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|