Jack, what has the factory advised you to do? Surely they have a solution to
this sort of problem . . .
73/72, George
Amateur Radio W5YR - the Yellow Rose of Texas
Fairview, TX 30 mi NE of Dallas in Collin county EM13QE
"Starting the 58th year and it just keeps getting better!"
w5yr@att.net
----- Original Message -----
From: "jack" <jfriend31@comcast.net>
To: <tentec@contesting.com>
Sent: Monday, October 13, 2003 3:46 PM
Subject: [TenTec] bigger problem with update
> i have now tried to update the Orion several times, twice the whole 9K
lines
> were processed but the version is still the original 1.356 rather than the
> 1.358 i downloaded ...
>
> the only way the update would run was to turn off error checking ...
>
> the first try took nearly 24 hours at the standard baud rate of 4800 ...
the
> second try only took about 5 hours by increasing the baud rate to 57600
> ...but neither attempt did anything
>
> if i run the update with error checking the error message displays:
> "communication with the radio has failed ...."
>
> i know that com1 and com2 work fine as i can plug the KAM Plus into either
> and run it just fine ...but neither works for the Orion ...
>
> any help would be greatly appreciated
>
> also in another matter: i cannot get MixW2 to transmit thru the Orion with
> VOX on (no PTT connection) tho i am told VOX will work fine ...i think
this
> is related to the fact that i cannot get any sort of connection between
the
> computer and Orion even with the supplied 9 pin cable
>
> thanks jack ak7o
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|