Jack
Perform a full MASTER RESET on the radio after
completeing the 1.363 Flash Update,I think that will
correct your problem. worked for me.
73
John WB4QDA
--- jack <jfriend31@comcast.net> wrote:
> i have now tried to update the Orion several times,
> twice the whole 9K lines
> were processed but the version is still the original
> 1.356 rather than the
> 1.358 i downloaded ...
>
> the only way the update would run was to turn off
> error checking ...
>
> the first try took nearly 24 hours at the standard
> baud rate of 4800 ... the
> second try only took about 5 hours by increasing the
> baud rate to 57600
> ...but neither attempt did anything
>
> if i run the update with error checking the error
> message displays:
> "communication with the radio has failed ...."
>
> i know that com1 and com2 work fine as i can plug
> the KAM Plus into either
> and run it just fine ...but neither works for the
> Orion ...
>
> any help would be greatly appreciated
>
> also in another matter: i cannot get MixW2 to
> transmit thru the Orion with
> VOX on (no PTT connection) tho i am told VOX will
> work fine ...i think this
> is related to the fact that i cannot get any sort of
> connection between the
> computer and Orion even with the supplied 9 pin
> cable
>
> thanks jack ak7o
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|