Carl,
Questions other may be interested in. I know your software can read/write
memories to the Argonaut V, Jupiter and Orion and I have used that function
with the Argo and the Jupiter.
However, can it read the radio's memories and then store those memories in
the N4PY Program's own files? Right now it seems that if I want to access
the radio's memories, I have to do that from the radio itself. Or, to
access memories from the program, I have to use the program's memories. I
have never found out how I can access the radio's memories from the program.
Second question, why can't the program read and write split memory files? I
tried it on the Argo and it will only handle a non-split memory file.
Thanks,
Duffy
-------Original Message-------
From: tentec@contesting.com
Date: Tuesday, October 14, 2003 7:30:51 AM
To: tentec@contesting.com
Subject: Re: [TenTec] MAJOR dead Orion problem with update
Jeff,
My Orion N4PY program can save and restore all the Orion memories.
73,
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Jeffrey Griffin" <jeffrey.griffin@comcast.net>
To: <tentec@contesting.com>
Sent: Tuesday, October 14, 2003 11:07 AM
Subject: Re: [TenTec] MAJOR dead Orion problem with update
> John thanks for the info, before I went to bed last night I read your
> email, and the ram erase worked. All is well now. I would of called
TenTec
> before I send the Orion in ,but your info made me sleep better! I didn't
get
> your phone call till this AM off of my answering machine as we turn the
> ringer off at night.
> Now this all bring's up another problem. I'm not one who programs alot of
> frequencies into my HF rig's memory. But, I still have to program 36 band
> stacking registers, 4 or 5 other settings, and record 2 voice messages. It
> would be nice to have a program to read the content's of the transceiver,
> massage it to comply to any updated Orion format changes and write it back
> out. I would think that someone who has programmed in all 200 memories
would
> be a bit more upset then me at this point.
> This is a great internet group. Not one 'I must be dumb' reply about my
> problem, I even got a late night phone call from John concerned that I
> might ship for no reason. It is very refreshing ...
>
> 73 Jeff kb2m
>
> ----- Original Message -----
> From: "John T. Fleming" <W3GQJ@comcast.net>
> To: "'Jeffrey Griffin'" <kb2m@arrl.net>; <tentec@contesting.com>
> Sent: Monday, October 13, 2003 11:05 PM
> Subject: RE: [TenTec] MAJOR dead Orion problem with update
>
>
> Jeff,
>
> I did the same thing 2 days before the hamfest. The pointers are
different
> and when you restore the user settings, it makes a BIG mess. Now Gary has
> the ram erase function in 1.363. I think I had problem with 1.361. Turn
> off the radio. Hold in the lock button next to the VFOB and power it up.
> It will tell you that you have a battery failure, but then load everything
> OK. I hope you get this message before you ship off your radio.
>
> 73,
> John
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|