[TenTec] Centurion

["Rob Atkinson, K5UJ" <k5uj@hotmail.com>]

Not much else to add except that it can be wired for 115 v. and if you are 
going to run it on that you should get a dedicated circuit and if you are 
going to get a dedicated circuit you may as well get 240 v. and if you don't 
confidently know what you are doing do what I did and pay a pro to put it in 
for you.  I'm always surprised at the no. of hams who balk at this.  To get 
a guy to come into my basement, run conduit, hammer drill an outlet box into 
the wall, put in a breaker, outlet, pull wire and give me a plug for a 20 A 
240 v. circuit cost $100.  I bet anyone who can afford a 1 or 1.5 Kw amp can 
afford that.
Don't burn your house down or kill yourself.  Get someone else to do the 
high voltage work and save yourself for other disasters like falling off 
your roof. : )

One more thing to think about at some point is a surge protector for the 
amp.   This is partly because unlike old amps which were entirely big robust 
components, new ones have some pc cards in them with more sensitive 
metering, control and switching circuits.  ICE (Industrial Communications 
Engineers) makes a nice 25A 240 v. unit which is available directly from 
them or through Array Solutions (www.arraysolutions.com).  It's the ICE 
model 338 240 v. line filter and surge supressor.

Rob Atkinson
K5UJ

_________________________________________________________________
Add MSN 8 Internet Software to your current Internet access and enjoy 
patented spam control and more.  Get two months FREE!     
http://join.msn.com/?page=dept/byoa

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec