Howdy - down here in Florida we have LOTS of thunder storms. I adjusted the
"delay" time in the "prog" AGC until the lightning crashes were minimized.
That turned out to be 0.21 seconds. I also played with the "decay" and found
that around 100 dB/S was the best to reduce the lightning crashes. To
further reduce the lightning crashes, I sometimes add the software noise
blanker. Play around. The adjustments available are amazing.
73, Tom, W7QF
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of jack
Sent: Thursday, October 23, 2003 19:56 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Orion AGC Programming
factory default is my choice HI jack ak7o
----- Original Message -----
From: "Greg Hodsdon" <k7kj@arrl.net>
To: "Ten-Tec Reflector" <tentec@contesting.com>
Sent: Thursday, October 23, 2003 11:09 AM
Subject: [TenTec] Orion AGC Programming
> Now that the capability to program the various AGC parameters on the
> Orion have been available for a while, I am curious as to what settings
> (hang, threshold, delay) people are finding satisfactory for most band
> conditions as "default" values.
>
> Greg, K7KJ
>
> Portland, OR
> k7kj@arrl.net
> http://www.qsl.net/k7kj
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|