TenTec
[Top] [All Lists]

RE: [TenTec] Why leave out calibration information TT????

To: <tentec@contesting.com>
Subject: RE: [TenTec] Why leave out calibration information TT????
From: "Rick Westerman" <Rick@dj0ip.de>
Reply-to: Rick@dj0ip.de, tentec@contesting.com
Date: Wed, 24 Dec 2003 15:20:25 +0100
List-post: <mailto:tentec@contesting.com>
Paul,

Why don't you call Ten-Tec Direct and ask them?

Their number is 01773 880788 (Derbyshire).

73
Rick

-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Paul
Sent: Wednesday, December 24, 2003 2:16 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Why leave out calibration information
TT????

I too would like the answer to the question below.

I have an Omni V, and would like to investigate the lopsided PBT
tuning that
it has.. but I don't want to do a "screwdrivers expert" job on it
in case
things worsen :-)

So to recap, does anyone know the correct alignment procedure for
the
Ten-Tec Omni V model 562.

I don't really want to make expensive transatlantic phone calls
for
information that really should be in the manual. My Japanese
FT-102 has full
alignment instructions in the user manual, and it is about the
same age as
the TT radio.

Paul MW0CDO in South Wales UK.

Seasons' greetings to all!

----- Original Message -----
From: <OTAKEBI@aol.com>
To: <tentec@contesting.com>
Sent: Tuesday, December 23, 2003 4:09 PM
Subject: [TenTec] Why leave out calibration information TT????


> Why does TT make such complete Manuals for the OMNI V and VI
and then
leave
> out basic information such as setting of IC Limit, Internal ALC
Limit, FWD
and
> REF adjustment,
> Meter Offset, etc.?
> I had to make two long distance calls to TT just to get the
information
for
> ALC calibration.
> I spoke to a very nice Tech and asked if the information that
was lacking
in
> the Manual could be found in a Service Manual or Supplement I
could buy
and he
> told me that no such thing exist.
> How does TT recalibrate a rig?
> I don't think that each Tech is expected to keep it in their
head.
> Does anyone on this reflector know if a place exist that this
information
can
> be bought or located?
> Thanks,
> Dan N4VET
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>