Scott,
When I had an OMNI VI+, I also considered replacing the roofing
filter.
Then in doing some research, I read somewhere that someone had
tried this and it did not bring the expected results and as I
recall, it was due to noise (but don't pin me down on that - it
was a while back when I read it). You might try searching the
web to see if you can find that post.
73
Rick
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Scott Johns
Sent: Wednesday, February 11, 2004 4:37 PM
To: Ten Tec List
Subject: [TenTec] Omni6+ mods: 125hz cw filter and 2 khz roofing
filter
I'm inquiring about the level of interest Omni6+ owners have in
getting
a 125 hz cw filter developed for this radio. Most of the other
high end
radios have a 125 option available (great for the low bands) and
perhaps
it's time for our favorite Omni to have the same!
If there is enough serious interest then I will pursue the
project.
Also, there may be a mod forthcoming that replaces the stock 15
khz
roofing filter with a 2 khz roofing filter.
Please respond off list.
73, Scott W3TX
All outgoing e-mails checked by Norton Antivirus
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|