Thanks very much. Actually I was not familiar with that antenna. Now I
understand.
Ron KG2BN
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Edward Crawford
Sent: Sunday, March 28, 2004 11:18 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Orion problem with SteppIR
controlbox...anySeattle-area Orion owners?
Are you familiar with the SteppIR Fluid Motion Yagi? It has variable length
elements which change length to tune the match as you change frequency or
bands sort of like the screwdriver mobile antennas, and you can change the
front to the back or back to front without turning the antenna. Apparently
they are trying to interface the SteppIR control box to automatically
frequency or band track with the Orion, and the guy wants to use someone's
Orion to test the interface.
I think this is about as non technical answer as you can get as I don't have
either one and don't know how they work.
73. Ed/w4wvw
----- Original Message -----
From: Ron Pletter<mailto:ron@plet.net>
To: tentec@contesting.com<mailto:tentec@contesting.com>
Sent: Sunday, March 28, 2004 9:05 PM
Subject: RE: [TenTec] Orion problem with SteppIR control
box...anySeattle-area Orion owners?
Although I don't own an Orion, but merely an Omni VI+, I have subscribed
to
this reflector for many years now, mainly because I learn so much by
reading
the postings of those more learned than I. However the referenced posting
went zoom right over my head. Could someone explain the problem in 4th
grade, OK, 6th grade language.
Much appreciated
Ron KG2BN
-----Original Message-----
From: tentec-bounces@contesting.com<mailto:tentec-bounces@contesting.com>
[mailto:tentec-bounces@contesting.com]On Behalf Of Torrey L. Mitchell
Sent: Sunday, March 28, 2004 12:40 PM
To: tentec@contesting.com<mailto:tentec@contesting.com>
Subject: [TenTec] Orion problem with SteppIR control box...any
Seattle-area Orion owners?
Recently I received my long awaited Orion. What a rig!
I was dismayed to discover that the design of the SteppIR control box did
not allow automatic control of the elements as the rig frequency changes.
I
called SteppIR and they confirmed the problem. Seems the fixed baud rate
of
57,600 from the Orion was not considered in the design of the control box.
To SteppIR's credit, they have been working hard on a serial interface
board
modification for the Orion. They've had my control box for almost three
weeks now. They think they have figured out the modification but
presently
have no Orion to beta-test the fix. Until they receive an Orion or can
use
someone else's...my control box and therefore my only beam antenna are not
available to me.
Help! Mike K7IR at SteppIR is looking for an Orion owner in the general
Seattle area. He's wanting to be able to spend an hour or two at some
Orion
owner's shack to test out the Orion serial board mod. Any volunteers?
We'd
all really appreciate it!
You could email me or email
support@steppIR.com<mailto:support@steppIR.com> or phone me at 515-78-2354
or call SteppIR at 425-391-1999.
Many thanks and 73's,
Torrey N9AUJ
_______________________________________________
TenTec mailing list
TenTec@contesting.com<mailto:TenTec@contesting.com>
http://lists.contesting.com/mailman/listinfo/tentec<http://lists.contesting.
com/mailman/listinfo/tentec>
_______________________________________________
TenTec mailing list
TenTec@contesting.com<mailto:TenTec@contesting.com>
http://lists.contesting.com/mailman/listinfo/tentec<http://lists.contesting.
com/mailman/listinfo/tentec>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|