TenTec
[Top] [All Lists]

Re: [TenTec] omni 6

To: tentec@contesting.com
Subject: Re: [TenTec] omni 6
From: JOHN <ku3g@yahoo.com>
Reply-to: tentec@contesting.com
Date: Mon, 14 Jun 2004 13:31:59 -0700 (PDT)
List-post: <mailto:tentec@contesting.com>
thanks for the reply cannot figure this one out , its only on 75, all the 
otherbands are great
thanks again

ac5e@comcast.net wrote:
Both the mic gain and the processor affect the audio level on the Omni VI and 
+. I used 9:00 on both the mic and proc as a starting point; a friend uses 
11:00 on mic and sets the proc to just kick the audio up to the black mark on 
the meter face. 

73 Pete Allen AC5E

--
Never squat with your spurs on


> I have an omni 6 with a problem that has me puzzled, the great majority of 
> the 
> time i'm on cw but yesterday thought we would try ssb on 75, everything 
> looked 
> great until i turned on the processor, the ouput meeting i used showed a 50 
> percent reduction in power, and unless i turned the mic gain way up thats all 
> i 
> could get out.... tried a dummy load with the same results, all the other 
> bands 
> work fine........any help would be appreciated
> 73 john ku3g
> 
> 
> ---------------------------------
> Do you Yahoo!?
> Friends. Fun. Try the all-new Yahoo! Messenger
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

                
---------------------------------
Do you Yahoo!?
Friends.  Fun. Try the all-new Yahoo! Messenger
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>