Joe Giacobello wrote:
Actually, Sinisa, I was referring to your FB writeup on the Orion where
you recommend backing off on the RF gain until the S-meter drops back
about 12 dB(?) or so.
No, I've never recommended such a thing, you misread it.
In my text 12 dB refers to the difference between
external noise level and RX internal noise level.
The adjustment is performed by using controls in the following order:
* PREAMP turned off;
* ATTN increased to 6, 12 or 18 dB;
* RF GAIN reduced.
Actually, I've never had the need to reduce RF GAIN,
PREAMP and ATTN sufficed (on main RX).
73,
Sinisa YT1NT, VA3TTN
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec