Re: [TenTec] ORION QRQ tests

[Martin Ewing <martin@aa6e.net>]

I'm not sure. You may have noticed: the Orion is a black box! :-) That's 
one reason this reflector is so busy. There was precious little mystery 
about my previous rig, the TS-520S. The schematic said it all.

I am not sure what your distinction is. The manual says that QSK Delay 
"slows the QSK action" whatever that means. For me, it behaves like 
semi-breakin. The T/R is in the "T" mode longer, but of course with key 
up it's not transmitting. Maybe it would be quicker to respond to the 
next key down when it's still in "T" mode.

On the other hand, you might be right about just blanking Rx audio. The 
reed relay (or whatever gadget makes the noise) goes plink-plink-plink 
for each dit I send, even at 60 wpm and 100% delay. Maybe that's really 
the mark of "T" mode? The antenna switch? Choose your own semantics.

73, Martin

Sinisa Hristov wrote:

> Martin Ewing wrote:
>
>  
>
> > Yes, except the QSK Delay adjustment seems to work like "VOX Hang". At
> > 100% setting, it holds Tx mode for maybe 0.5 second.
> >    
>
>
> Are you sure that it actually holds TX active,
> as opposed to just delaying receive audio?
>
>
> 73,
>
> Sinisa  YT1NT, VA3TTN
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>  
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec