TenTec
[Top] [All Lists]

[TenTec] Re: [Orion] Powering the fan and 238B from the Orion?

To: tentec@contesting.com
Subject: [TenTec] Re: [Orion] Powering the fan and 238B from the Orion?
From: Duane A Calvin <ac5aa@juno.com>
Reply-to: tentec@contesting.com
Date: Tue, 14 Sep 2004 13:28:21 -0500
List-post: <mailto:tentec@contesting.com>
Eric,
        It works for me, but, curiously, I get a nice "buzz" on
frequencies above 28.100 MHz from the fan when I do this.  I think it's
my Y-cable, but I still haven't remembered to replace it to be sure
(probably a reflection on how often 10m is active these days.) 
Otherwise, it's just fine.

        73,  Duane


On Tue, 14 Sep 2004 02:10:27 -0400 Eric Rosenberg <wd3q@starpower.net>
writes:
> Not sure if I can do this... but I'd like to power the Orion's add-on 
> 
> fan and the 238B tuner (s-meter, or so it seems) from the 13.8v 
> output 
> on the Orion.
> 
> Is this okay or too much of a load?  Some reviewer on e-ham said 
> this 
> was bad news...
> 
> Comments, thoughts?
> 
> Eric W3DQ
> Washington, DC 
> 
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
> 
> 


Duane Calvin, AC5AA
Austin, Texas
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Re: [Orion] Powering the fan and 238B from the Orion?, Duane A Calvin <=