Hi Jerry..
I had recently asked a similar question on the reflector , since I have just
bought a
really nice Paragon, and also have both 961 and 962 supplies.. The answer I got
from everyone is that the two supplies are interchangable, the only difference
being that the power transformer installed in the 961 is a more "heavy duty"
version, than the one in the 962.. I have used both power supplies on the
Paragon with identical results, and no problems at all..
One thing that I did notice however with both supplies, is that really is
imperative that a good solid ground braid connection be made from the rig to
the power supply as Ten Tec recommends.. I had some odd ground loop problems
until a proper ground was made.. (wire is really not quite good enought, it
should be ground braid... 73, Jim K2NP
----- Original Message -----
From: "Jerry Volpe" <kg6tt@tomorrowsweb.com>
To: tentec@contesting.com
Subject: [TenTec] Can I safely use my 961PS on my Omni-VI+ till 962 isrepaired?
Date: Sun, 26 Dec 2004 06:50:07 -0800
>
> The subject says it all.
>
> Not sure how long it will take me to fix my 962. Is there any
> danger of my using my 961 on my Omni-VI+?
>
> 73,
> Jerald, KG6TT
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
--
_______________________________________________
Find what you are looking for with the Lycos Yellow Pages
http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|