TenTec
[Top] [All Lists]

[TenTec] Argo V firmware? (was Jupiter)

To: "TenTec List (TenTec List)" <TenTec@contesting.com>
Subject: [TenTec] Argo V firmware? (was Jupiter)
From: "Rick Williams" <rick.williams@telus.net>
Reply-to: tentec@contesting.com
Date: Mon, 17 Jan 2005 09:54:12 -0800
List-post: <mailto:tentec@contesting.com>
Sorry Scott but I can't resist.  

Similar to the Jupiter reference, stories have suggested that the Argo V
firmware was complete and no updates were planned.  However, rumours of the
existence of new (unposted version 1.08) firmware have been circulating for
more than a year.  Rigs sent into the factory for warranty work are now
commonly coming back with firmware 1.08 and hardware modifications.  Yet the
only version available on-line is the June 2003 version 1.07.  It has also
come to my attention that the factory is taking a list of users wishing to
send their Argo V rigs in for hardware modification and installation of the
1.08 firmware.

I am aware that use of 1.08 requires hardware changes.  Some of us have done
the hardware changes but still don't have access to the firmware.  More than
a month ago it was suggested that 1.08 would be posted in a few days along
with instructions on the hardware change.  On January 2nd a posting on
another list indicated that the 1.08 information would be posted when
everybody was back from the holidays and has had a chance to proof the
instructions. (I assume that the holidays referred to were Christmas 2004
and New Year 2005.)

Can you provide any additional insight into the release date of the latest
firmware for the Argo V?

Thanks!

73, 

Rick 
VE7TK

Website:  http://www3.telus.net/ve7tk  


----- Original Message ----- 
From: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>
To: <tentec@contesting.com>
Sent: Monday, January 17, 2005 10:11 AM
Subject: Re: [TenTec] Jupiter


> Hello:
>
> Software updates for the Jupiter will continue.  Please, if you see or
> hear reference made to "no longer any software updates" for the Jupiter, 
> stop and correct this.  It is a shame that reviewers of this radio on 
> eham.net took it upon themselves to decide that this was the case - when 
> it is not.  I have spent an inordinate amount of time trying to put and 
> end to this.
>
> Thanks
>
> Scott Robbins
> W4PA
>
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>