to run Orion on 60 meters:
http://www.doug-smith.net/sixty.htm
press ZERO on the numeric pad
this allows transmit between 5.330 and 5.407 MHz
you must be using firmware 1.346 or later
set VFO to
5332.5 USB 50 W or less
5346.5 ditto
5366.5 ditto
5371.5 ditto
5403.5 ditto
LOCK VFO
save the above to one of the 200 available channel memories for recall
review paragraph 3.8.9 in manual
channel memories do not sotre TX BW
----- Original Message -----
From: "Knox, Richard" <richard.knox@gd-ais.com>
To: <tentec@contesting.com>
Sent: Monday, January 17, 2005 9:45 AM
Subject: [TenTec] 60 Meter Mod
Good Morning Members of the TenTec Reflector!
Does anyone know if there is a mod that will allow an Omni VI+ to operate
on the new 60 Meter Band?
Thanks in advance and 73!
Dick
KD4BRL
COL(R) Richard L. Knox
Homeland Security and Assurance
Advanced Information Systems
General Dynamics
Ann Arbor, Michigan 48105
Tel: 734-994-1200, ext 2670
Fax: 734-994-5338
E-Mail: Richard.Knox@GD-AIS.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|