Can I also echo the wishes of Martin & Bob.
**********************************
**********************************
Line Level SHOULD BE FIXED (as per the label)
at 0dBm across 600 ohms = 0.775volts,
IRRESPECTIVE of the volume controls.
**********************************
**********************************
If TenTec see more people confirm this, then perhaps they will
add it to the firmware "to do" list.
John G3PPB
------------------------------
Message: 9
Date: Sun, 23 Jan 2005 06:09:50 -0800 (PST)
From: Martin AA6E <msembx-aa6e@yahoo.com>
Subject: Re: [TenTec] Orion AUX out audio question
To: tentec@contesting.com
Message-ID: <20050123140950.29072.qmail@web81403.mail.yahoo.com>
Content-Type: text/plain; charset=us-ascii
Tommy,
My rig does not behave that way. Left=Sub produces constant output
unless you zero out the Sub AF volume. (v 1.372) In that case the aux.
output is blanked out.
Thinking about this a little more, I think the TT logic is just wrong
for my use. I want the aux. output to be completely independent of
front panel level controls. That's what "line out" normally means.
This could be fixed in firmware -- and/or made a menu option.
73, Martin AA6E
--- Tommy <aldermant@alltel.net> wrote:
...however if you have
> LEFT set for SUB, you can vary the audio level at pin 4 using the
> SubRx AF control.
>
>
------------------------------
Message: 11
Date: Sun, 23 Jan 2005 09:38:42 -0500
From: "Robert Carroll" <rlcarroll@patmedia.net>
Subject: RE: [TenTec] Orion AUX out audio question
To: <msembx-aa6e@yahoo.com>, <tentec@contesting.com>
Message-ID: <20050123143849.1F12F4CC9D@mail.patmedia.net>
Content-Type: text/plain; charset="us-ascii"
Martin-
I would like to see line out as you described your wishes.
Bob W2WG
__________________
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|