Duane,
Thanks for your advice. My log version is 6.02 and it only shows TENTEC
and JUPITER for radio selection. Is there a later version that handles
the Orion settings ?
Henrik
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of Duane A Calvin
Sent: Saturday, March 19, 2005 6:24 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Orion and dx4win log settings
Henrik,
The settings I use in DX4WIN that work are:
TenTec Orion rig selection,
Address 00 (default checked)
Baud rate 57600 (default checked)
Notes with radio: without RIT
COM port (COM1 in my case)
Poll rate: 500 ms
Max Tries: 6
DTR High (checked)
RTS High (checked)
Now, if all of these are set, are you able to make DX4WIN and the Orion
communicate at all, or does it immediately go to "rig timed out?" The
only time I get a "rig timed out" is if I send a command to the radio
(or am in the middle of logging a new one) and turn the radio off. (Or
try to send a command to the radio with it turned off.)
73, Duane
On Sat, 19 Mar 2005 08:19:32 +0100 "Henrik Weiss" <oz1ing@mail.dk>
writes:
> I have tried different settings in the log program but keep
> receiving
> message "radio timed out".
>
> Can anyone with this setup guide me ?
>
> Thanks in advance,
>
> Henrik
> OZ1ING
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
--------------------------------------
Duane Calvin, AC5AA
Austin, Texas
http://home.austin.rr.com/ac5aa
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|