Re: [TenTec] Argonaut V and PSK-31

["jack" <jfriend31@comcast.net>]

MixW will nearly every digital mode including BPSK31, QPSK31 and FSK31. i 
have had no problem using MixW with ICOM and TenTec rigs. my interface is 
simple for ICOM also: an isolation transformer in series with 50K ohm volume 
control in both lines. one can set the input/output to whatever he needs 
that way. for the Orion i simply use the included cable that runs directly 
to the sound card from the back of the Orion.
you can download MixW from the MixW site and give it a try free.
good luck jack

----- Original Message ----- 
From: "J. Reed" <jhreed@chilitech.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, June 04, 2005 9:36 PM
Subject: Re: [TenTec] Argonaut V and PSK-31


> Jack, thank you for coming back so fast...
>    I am trying to run BPSK as used in the
> program HamScope.  This might NOT be
> the same as a packet program PSK31 so I'm
> again asking for your help IF I'm trying to
> do something different...  thanks, Jim Reed.
>  ----- Original Message ----- 
>  From: jack
>  To: Discussion of Ten-Tec Equipment
>  Sent: Saturday, June 04, 2005 23:27
>  Subject: Re: [TenTec] Argonaut V and PSK-31
>
>
>  MixW is my choice of all i have tried, jack ak7o
>
>  ----- Original Message ----- 
>  From: "J. Reed" <jhreed@chilitech.net>
>  To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
>  Sent: Saturday, June 04, 2005 8:26 PM
>  Subject: Re: [TenTec] Argonaut V and PSK-31
>
>
>  > Hello, I'm just now getting interested in running PSK with my TenTec 
> 550
>  >
>  > anyone having great results with a particular program?  Thanks, Jim 
> Reed.
>  >
>  >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec